Plinth Lighting

Showing all 2 results

  • Sale! Nimbus LED Plinth Light Kit

    Nimbus LED Plinth Light K..

    £46.08 £34.84 inc. VAT

    Integrate the Nimbus along the plinth in the kitchen to create a subtle glow. This stainless steel fitting looks stunning in a contemporary kitchen with white gloss doors.

    Key Points

  • > IP67 rated fittings suitable for use on kitchens plinths or in bathrooms.
  • > All components required are included in the pack (6 fittings and LED driver).
  • > 1 metre of cable on each individual fitting. 1.5 metres of mains cable from the driver (includes 13A plug).
  • > Quality stainless steel fitting.
  • > The maximum walkover pressure is 100kg.
  • > As well as using in the plinth, this fitting is also suitable for use in ceramic tiles, natural stone, hard wood or Quartz flooring.
  • > Cool white LED, an ideal plinth lighting option for the contemporary kitchen design.
  • > Low energy consumption, each fitting runs at only 0.3W.
  • > The maximum wattage load of the driver in this pack is 8W.
  • > Diameter: 30mm
  • > Depth: 18.5mm
  • > Cut-out: 24mm
  • Specification

    Wattage: 1.8W per fitting
    Cool White (5500k) 
    Beam Angle:
    30 degrees
    Stainless Steel
    Lamp Life:
     18.5 years
    Cable Length:
    22.8 Lm

  • Sale! Specto LED Plinth Lights

    Specto LED Round Plinth L..

    £5.40£61.68 £4.08£46.63 inc. VAT

    Get a stylish, discrete fitting and a stunning effect with the Specto Plinth light pack.

    Key Points

  • > Available as a pack, containing either 4 or 8 fittings and 1 x 6W driver.
  • > Individual fittings also available should you wish to have more than 8 fittings in a single run from one driver.
  • > Each fitting runs at only 0.32W.
  • > IP65 rated (protected against water ingress) – ideal for use on the kitchen plinth or in zone 1 area’s of the bathroom.
  • > 15mm fittings – very discreet.
  • > Chrome surround with an individual LED per fitting.
  • > The fittings daisy chain together for simple installation.
  • > Compatible with Sensio 24V switches and dimmers.
  • > 6W driver included in the packs (SE40553) meaning a maximum of 37 fittings could be run from the one driver (based on fittings being daisy chained).

    > Cut-out size: 10mm

  • Specification

    Wattage: 0.32W per fitting
    Cool White (5500k) / Warm White (3000k)
    Beam Angle:
    90 degrees
    Lamp Life:
    9 years
    Cable Length: